Well Flow Metrics

Field Reference & Calculation

HomeLSD LocatorTroubleshooting GuideUnit ConverterNA Well & Land LocatorWell Summary & LiftWell DesignESP Pump DepthTubing SizeFlow LossesPower ConsumptionPCP AlternativeRod Pump ComparisonClearance & FlexPMM vs Induction MotorSurface EquipmentHPS Horizontal PumpingDisclaimer & Terms

v1.0 — Petroleum Engineering

ESP Pump Depth

ESP Pump Depth Calculator

Calculate optimal pump setting depth — metric units (metres, kPa)

No shared well data yet — values entered or calculated in other modules will appear here.

Well Parameters

Well Total Depth (m)
Perforation Depth (m)
Static Fluid Level (m)
Pump Intake Pressure (kPa)
Casing Pressure (kPa)
Tubing Pressure (kPa)
Fluid Gradient (kPa/m)
Tubing Friction Loss (m)Manual

Manual friction estimate

View Flow Loss Calculation

Gas Handling

No gas separator selected. Verify free gas at pump intake is acceptable.

Results

Pump Setting Depth

—

m

Dynamic Fluid Level

—

m

Liquid Head Above Pump

—

m

Pump Submergence

—

m

Vertical Lift from Dynamic Fluid Level

—

m

Estimated Total Dynamic Head

—

m

Enter Pump Intake Pressure to compute liquid head and dynamic fluid level.
Field reference only — verify before use.
HomeLSDTroubleshootConvert

Field reference only — verify before use

PetroCalc is provided for general informational, educational, and field reference purposes only. The calculations and information provided are not intended to replace manufacturer specifications or professional advice — verify all inputs, calculations, results, equipment specifications, and operating conditions before relying on them. No guarantee is made as to accuracy or suitability, and the developer is not responsible for equipment damage, production loss, injury, or other losses resulting from reliance on this application.

Read the full disclaimer & terms