Well Flow Metrics

Field Reference & Calculation

HomeLSD LocatorTroubleshooting GuideUnit ConverterNA Well & Land LocatorWell Summary & LiftWell DesignESP Pump DepthTubing SizeFlow LossesPower ConsumptionPCP AlternativeRod Pump ComparisonClearance & FlexPMM vs Induction MotorSurface EquipmentHPS Horizontal PumpingDisclaimer & Terms

v1.0 — Petroleum Engineering

Tubing Size

Tubing Size Calculator

Determine optimal tubing diameter for your flow conditions — metric (mm, m³/day, kPa)

No shared well data yet — values entered or calculated in other modules will appear here.

Flow Parameters

Flow Rate (m³/day)
Viscosity (mPa·s)
Well Depth (m)

Tubing Selection

SizeOD (mm)ID (mm)kg/mArea (cm²)
2 3/8"60.350.76.9920.19
2 7/8"73629.6730.19
3 1/2"88.97613.8445.36
4"101.688.316.3761.24
4 1/2"114.3100.518.9779.33

Results

Flow Velocity

—

m/s

Reynolds Number

—

Friction Factor

—

(Moody)

Pressure Loss

—

kPa

Pressure Loss

—

bar

Recommended Size

—

Total Tubing Weight

—

kg

Flow Regime

—

Re = —

Field reference only — verify before use.
HomeLSDTroubleshootConvert

Field reference only — verify before use

PetroCalc is provided for general informational, educational, and field reference purposes only. The calculations and information provided are not intended to replace manufacturer specifications or professional advice — verify all inputs, calculations, results, equipment specifications, and operating conditions before relying on them. No guarantee is made as to accuracy or suitability, and the developer is not responsible for equipment damage, production loss, injury, or other losses resulting from reliance on this application.

Read the full disclaimer & terms